In most units, who is responsible for investigating dropped objects?
The pressure in a fire extinguisher is within a safe operating range when the guage needle is within the
Individuals not directly involve in nitrogen servicing should remain outside a
20 foot radius
Who is responsible for the -1 TO preflight check?
When serving as fireguard, you position yourself even with the
nose of the aircraft and at a 45 degree angle outboard of the engine being started
What reference covers internationally accepted hand signals?
During an aircraft tow, who is authorized to give the "all clear to move" order?
What are the Air Force's maintenance capabilities in order of increasing capability?
Organizational, intermediate, and depot
What type of maintenance ensures that equipment is ready and available at the time of need?
Objectives of the MDD system include
collecting, storing, and retrieving base-level data
What information does the configuration management subsystem ensure is loaded properly into the maintenance information system database?
Select serially controlled and time change items
What AFTO 781 series form is used as a source document for obtaining billing information for fuel and oil?
The AFTO 781 must be removed from the forms binder
after the event number is entered at the maintenance debriefing
Engine over-temperature conditions are recorded on an AFTO
Who determines which items in the MDS specific -6 TO need historical reporting?
The IMDS is the production-oriented, automated maintenance management system to give managers visibility and control of resources at the
The training management subsystem aids trainers and supervisors by
helping with forecasting and scheduling personnel for training
When should you accomplish an initial evaluation in your training program?
Within 60 days of arrival
When should you accomplish an initial evaluation in your training program?
Within 60 days of arrival
Where can you find a list of training courses available for an AFSC
CFETP, Part 2
he TBA provides Air Force personnel with global, real-time
visibility of personnel technical qualifications, certifications, and training statuses
Which TO library does not need to maintain publication currency?
What is the total number of Air Force TO catalogs?
Which column in the TS manual gives instructions that call for an action and lists two possible responses?
What TCTO is identified by a series of re diagonals alternately spaced with red Xs around the border of the first page?
Which TO outlines the procedures for entries on the AFTO Form 22?
Which TO improvement report type requires action on a To deficiency which, if not corrected, could cause reduced operational efficiency?
Which type of nondirective publication may cite forms and provide guidance on completing them but cannot enforce what's on the form?
Which maintenance stand has an adjustable height of 13 to 20 feet?
Which of these is a scissor-type maintenance stand?
What is the maximum load, in pounds, that the model 4000 engine trailer can support?
On straightaways the maximum towing speed for the Model 3000 engine trailer is
What type of jack is normally used to change a tire on an aircraft?
Who is responsible for ensuring that the AFTO Form 124 is properly documented?
GOX high-pressure cylindersare painted
green with a white band near the top
When servicing aircraft the gaseous nitrogen servicing trailer can be operated by
qualified operators only
What is the horsepower rating of the diesel engine powering the SGNSC?
What is the maximum pressure that the SGNSC can deliver high-pressure nitrogen?
The usable pressure range of the MC-1A air compressor is 0 to
The MC-2A air compressor is capable of delivering air at a maximum pressure of
The H-1 heater has an adjustable heat output that ranges from
150 to 280 degrees F
What s the maximum tow speed for a C-10 air conditioner
he C-10 air conditioner is capable of delivering conditioned air in a range from
47 to 200 degrees F
The A/M32A-86 generator set's T-R produces
What unit is capable of providing AC and DC electrical power, in addition to pneumatic power, for ground maintenance?
Which technical order has operation and servicing information for the A/M32A-60?
The FL-1D floodlight consists of two
1,000 watt lamp fixtures
What is the maximum towing speed of the FL-1D floodlight on smooth surfaces?
What is used to drive the MK-3A-1?
An electric motor
How are the hydraulic systems on the MK-3A-1 hydraulic test stand designated?
Number 1 and Number 2
he MJ-2A reservoir holds what amount of fluid?
The MB-4 Coleman incorporates
four-wheel steering, four-wheel drive
What is the maximum governed speed of the MB-4 Coleman?
What type of steering system on the MB-4 Eagle tow vehicle provides for two-wheel steer, four-wheel coordinated steer, and four-wheel oblique steer?
Why are aluminum alloy washers used with steel bolts on aluminum alloy parts in low-torque applications?
How are special bolts identified?
The bolt head is marked with the letter S
Which bolt is never used in areas where tension is present but is often used as pins in control systems?
Which bolt has a recessed head and is used in high-tension applications?
An internal wrenching type
Left-hand threads on a turnbuckle can be identified by the
groove on the end of the barrel
Normally, what type of material is used in the construction of a pressure seal?
A push-pull rod end engagement is checked by
inserting safety wire in the hole in the end of the terminal
What is the interval that should be used for installing cushion clips on aircraft tubing?
15 to 20 inches
The allowable limit for nicks and scratches on a straight section of aircraft tubing is no deeper than
15 percent of wall thickness
Generally, low-pressure hoses are used for what pressures?
300 psi and below
The limit for securing closely spaced bolts in series when using the single-wire safety method is the maximum number of bolts that can be secured using a
24 inch length of wire
When securing widely spaced bolts by the double-twist safetying method, what is the maximum number of bolts that may be wired in a series?
Which retaining rings are manufactured with small holed in the lugs that can be removed and installed by pliers specially designed for use with them?
Axially assembled retaining rings
Which retaining rings are installed into housings or onto shafts making 360-degree contact with the grove?
Spiral retaining ring
What part of a cannon plug completes the electrical circuit?
In the cannon plug code MS3106F-12-10PW, the letter P indicates
Which torque wrench indicates the amount of torque or twisting action being applied?
Which torque wrench is designed to automatically release when a predetermined torque value is reached?
Prior to using a torque wrench, cycle the torque wrench through the breakaway torque at the
Maximum setting at least six times
What are the two stresses that a fastener takes whe tightened?
Tension and torsion
Which type of friction is defined as the force that exists between two physical bodies to keep them from moving?
Use the range button on the Fluke multimeter to
move the decimal point
hen the H symbol is shown on the Fluke multimeter display the
touch-hold mode is in use
Which tool is used to measure the gap between two parts?
What is the longest possible movement etween the micrometer/s spindle and anvil?
Which caliper is joined by a strong spring hinge,screw, and adjustment nut?
Which caliper is used for finding shaft centers of locating shoulders?
Which caliper has the word "IN" and "OUT" stamped on the frame
Who is responsible for ensuring that good supply discipline is practiced?
Surpervisore at all levels
ench stock levels are established to provide a
Which form is used to issue an item of equipment for short, specified periods?
AF IMT 1297
ll items that come through supply channels are assigned what type of code?
Within maintenance the internal control of reparable items is accomplished through the DIFM notice and
AFTO Form 350
Which DD forms are easily identified by their green margins and letters?
157-2 and 1577-3
Engines overhauled by depot are covered against defects in workmanship for
100 hours of operation or one year from the date of receipt
Which inspection is due on the accrual of a set number of flying or operating hours, or at the expiration of a calendar period specified in the applicable aircraft-specific -6 technical order and is a thorough inspection of the entire aerospace vehicle?
Which inspection concept uses specified calendar intervals to build a schedule and consists of the home staion check, major, and minor inspections?
Which inspection examines areas, components, and systems to a degree beyond -6 technical order inspection requirements?
Programmed depot maintenance
Minimum aircraft inspection requirements are outlined in
Which inspection is usually performed just prior to takeoff and may include operational checks of some systems?
The TH inspection is normally perfomed
after flights when a turn-around sortie or continuation flight is scheduled
Which inspection is required if an aircraft is idle for more than 30 or 90 days?
Which inspection ensures the completeness of historical documents?
To transfer -21 equipment through transportation channels, you should use a DD form
Which TO should be consulted for detailed information about weight and balance?
What is used in determining design criteria such as engine requirements, wing area, landing gear requirements, and payload capacity?
Which medical concept forms the basis of ABDR assessment philosophy?
Corrosion of deterioration of a metal part continues until the part is
exhausted or salvaged
What type of corrosion can be recognized by a lifting up or swelling of the metal grains?
What corrosion type qppears as corroded cracks in a metal?
Alkaline and solvent cleaners authorized for us on our aircraft are specified in
After treatment which solution is used to neutralize areas affected with electrolyte from a lead-acid battery
Atmospheric pressure at sea level is
14.7 pounds per square inch(psi)
A barometer is designed to measure pressure in
inches of mercury
The primary force an airfoil has to defeat is
The force that acts upward at a right angle to the direction of the relative wind is
The force that acts parallel to the relative wind is
The stress that resists the force tending to cause on layer of material to slide over an adjacent layer is called
What is the design that uses any combination of longerons, stringers, bulkheads and frames in the construction of the fuselage called?
The structural members used to give shape to the aircraft and provide a means for attaching the skin to the structure are called
The most common type of material used for fuselage construction is
The wing design used on most modern military aircraft is
The fixed vertical surface of the empennage is called the
Engine mounts are typically made of corrosion-resistant steel that is able to withstand forces of
180,000 to 200,000 psi
The main difference between inspection plates and panels is
A network of ultrafine cracks that form on or under the surface of transparent plastics is called
What are the reference locations in the vertical direction measured from a reference datum that is usually well below the aircraft called?
Movement about the vertical axis is called
Which flight control surface is longitudinal control surface?
Which of these is attached to the trailing edge of a horizontal stabilizer?
When making a right turn, the relative position of the ailerons is the right aileron trailing edge is
up, left aileron trailing edge is down
The purpose of wing flaps is to
increase lift and drag
The purpose of aircraft trim systems is to
correct minor deviations in flight attitude
Matter is any substance that has mass and
Atoms are made up of
protons, neutrons, and electrons
Electrons can be released from their outer orbit by all of the following forces except
What is the electrical pressure that causes electrons to flow through the conductor called?
If you apply 24 volts through a total resistance of 6 ohms in a series circuit, the amperage would be
A permanent magnet is produced from a material with
high reluctance and low permeability
When soft iron is brought close to a permanent magnet it is
The greater the current flow through an electromagnet, the
greater the strength
Current flow in most aircraft circuits is controlled by
The majority of aircraft circuit protection devices are normally located
in the aircraft cabin
What term describes current that reverses its direction at regularly recurring intervals?
The methods used to cool brushless alternating current (AC) generators are
engine oil and blast air
The output of the constant speed drive (CSD) used to drive a 60/80 kilovolt ampere (KVA) generator is approximately
The underspeed switch (USS) on the 60/80 kilovolt ampere (KVA) generator constant speed drive (CSD) actuates at
What supplies rotary power to the input gear of the constant speed drive (CSD)?
A battery's internal component that is a grid or framework which supports the active chemical materials is called the
A 24-volt nickel-cadmium battery has
The nickel-cadmium battery can be fully charged only by
What type of motor can operate on alternating current (AC) or direct current (DC)?
A shunt-type motor has
Low starting torque and good speed regulation
The three states of matter are
liquids, gases, and solids
When any force causes a solid to change permanently, the solid is said to have
passed the elastic limit
The mot outstanding characteristic of a liquid is its
ability to conform to the shape of its container
What usually produces flow in a pneudraulic system?
Piston pushing the fluid
Who was among the first to study the compressibility of gases?
If 50 pounds per square inch (psi) of cylinder pressure acts on a 5-square-inch piston head, what will the resulting force be?
When an 8-square-inch piston moves 5 inches within a cylinder, what volume of liquid is displaced?
40 cubic inches
Turbulence affects fluid-flow in a hydraulic line by
creating resistance and loss of energy
Want to see the other 172 Flashcards in 2AX5X Volume 1?JOIN TODAY FOR FREE!